Macroscopy (Tissue Grossing Stations and MacroDoc-Stations) with Downdraft Extraction

Macroscopy-Station

MA-0880 „MacroDoc 880“ Macroscopy Station

Description and Features
Most modern tissue grossing concept for guaranteed pollution
free (formalin) air in breathing zone of the user. For wall positioning
(1 person) including superstructure with 3 doors.
Connection to in-house extraction system.

MA-0880

All infos for this product can be found at Product-Specification.pdf

MA-0885 „MacroDoc 885“ Macroscopy Station

Description and Features
Most modern tissue grossing concept for guaranteed pollution
free (formalin) air in breathing zone of the user.
For peninsular or island positioning (2 persons opposite to each other)
including superstructure with 3 lifting doors.
Connection to in-house extraction system.

MA-0885

All infos for this product can be found at Product-Specification.pdf

Accessories

Digital Macro-Workstation for "MacroDoc" Grossing Stations

Individually fitted to your needs. Incl. following modules / options:
- Desktop housing PC with Pentium III processor (886 Mhz), 128 MB, hard disc, 10-/100-Mbite-card on board, windows 2000 pro
- Super Flat Monitor (3cm)
- Digital dictating system with microphone and foot switch
- Voice-identifying-system with pathology dictionary installed
- Macro-Picture-Recording-System (Special-Recording-Software), Macro- digital- video- camera, video-lightsystem, polefilter, pc remote- control
- Installation, preparation and set-up

Waste container (extracted)
Block with 2 drawers

Tissue Grossing Tables with downdraft extraction

MA-0032 Tissue Grossing Station

Description and Features
Most modern tissue grossing concept for guaranteed pollution
free (formalin) air in breathing zone of the user. Adaption to
in-house extraction system.
- solid 40mm stainless steel frame construction.
- magnetic bar for dissecting tools
- height adjustable feet (40mm).
- 1 ruler on each side (done by laser technology)
- 3-part perforated working area (1100Wx850Dmm) with finger holes

MA-0032

All infos for this product can be found at Product-Specification.pdf

MA-0033 Necropsy Grossing table for medium size animals with downdraft extraction (single use)

Description and Features
Single-worktable for wall positioning no sink. Same specifications as MA-0032, with the exception of the sink

MA-0034 Necropsy Grossing table for medium size animalswith downdraft extraction (double use)

Description and Features
Peninsular type table for two persons working opposite to each other, without sink. Same specs as MA-0032, except for depth = 900mm and sink.

MA-0087 Tissue Grossing Station with Downdraft Extraction, double

Description and Features
Most modern tissue grossing concept for guaranteed pollution
free (formalin) air in breathing zone of the user. Connection to
in-house extraction system.
- solid 40mm stainless steel frame construction
- magnetic strip for dissecting tools
- height adjustable feet (40mm). 3-part, perforated (D=12mm)
- 1 ruler on each side (done by laser technology)
- 3-part perforated working area (1100Wx850Dmm) with finger holes

MA-0087

All infos for this product can be found at Product-Specification.pdf

MA-0088 Necropsy Grossing table for small animals

Description and Features
With downdraft extraction and small sink
For dissecting small animals in toxicology etc.
Touchfree formalin or isotonic salt solution dispensing system available as option. Perforated work area with grossing board
made from "Corian" with black "makro" differentiation area.
Computer systems may be installed
Material: Stainless steel EN/DIN 1.4301 - K 240
Dimensions: 1200(W) x 650(D) x 750(H)

Accessories for Grossing Tables

Fume extraction Air-Box for necropsy tables MA-3010
0-800 m3 /h air volume, adjustable volume.
Square construction for inside or outside installation

Switch MA-0540
for adjusting fan-speed.
Mounted to grossing table for easy access

Tissue grossing board MA-0232
Material: Corian
With drain & black "macro" field for light specimens
Dimensions: 500(W) x 420(D) x 30(H) mm

In-Sink-Erator (Grinder) MA-0047
For all MW Grossing Tables
0,75 HP with stainless steel grinding chamber.
Super silent design with air-operated ON/OFF switch.
Dim.: 310 overall heigth / 210 overall dia.

Dictating microphone (flexible) for necropsy tables MA-0862
Dynamic type (200 Ohm) mounted on a
flexible stud

Tool rack for necropsy tables (25 x 15cm) MA-0234

Writing extension for necropsy tables (50x40cm) MA-0235

Storage board for "dual" necropsy tables MA-0996
For centre positioning between grossing / registration
workplace. Stainless steel.
Dimensions: 110(L)x30(W)x20(H) cm

Magnifying glass with cold-light, flexible MA-0995
Magnifying glass dia. = 130mm / 3 diop.

Double plug set for necropsy tables MA-0997
For installation on front-panel

Metering System for formaline and isotonic solution MA-0998
Container of 60 litre incl. pump and handpieces

MA-0998

Electronic Organ Scale MA-0879
Battery operated / 1-2000gr (1 gr increments)

Dictating unit / tape recorder for necropsy tables MA-0854
Type "Philips 730" with recording and replay controls.
Especially wired for use with grossing table microphone !
Ready for use !
Note : we manufacture custom made necropsy stations according to your specs and do guarantee a formaline fume level at 50 cm above the working area of less than 1 ppm !

MA-2130 „Bio-Safe” Animal Dissecting Station (double)

Description and Features
Description and features of standard-version:
- Solid 40mm stainless steel frame construction. All openings are
hygenically closed. Sink with round edges (R=25mm). Corpus and
fixed trims are of double-wall-design with sound dampening insert.
- Magnetic strip for dissecting tools
- Height adjustable feet (40mm). 3-part, perforated (D=12mm).
- 1 dissecting rulers (to frame by laser-technology).
- 3-part working area (1100Wx600Dmm) w. finger-holes and
surrounding perforated extraction channel (80mm). Each part can
be raised up to 70° for optimum exsanguination of animals.
- Super structure with 2-part storage cabinet with lift-doors. For
specimen containers, servers, camera, barcode readers, dictating
systems, PC hardware and documentation.
- Sink 400 x 400 x 250(D)mm with flexible shower and hw/cw
mixing device.
- Sprinkler wash-down system with 10 spray-jets in plenum below
the perforated work area.
- Illumination: 2 adjust. spots and 2 fluorescent lights (12000 lumen)
- 2 sockets (230V) and 1 empty PC-data receptacle
- Dissecting board with 4 feet (30mm). Material: CORIAN. With blue
„macro-field“, 100mm dia. for optimum differentiation
- Waste formalin drainage system with micro-strainer and 15
litre waste tank positioned on a mobile stainless steel cart.
- Paper towel holder
- Rinse bar with 8 spray jets (120°) for cleaning the plenum.

All infos for this product can be found at Product-Specification.pdf

MA-2140 „Bio-Safe” Animal Dissecting Station (single)

Description and Features
Description and features of standard-version:
- Solid 40mm stainless steel frame construction. All openings are
hygenically closed. Sink with round edges (R=25mm). Corpus and
fixed trims are of double-wall-design with sound dampening insert.
- Magnetic strip for dissecting tools
- Height adjustable feet (40mm). 3-part, perforated (D=12mm).
- 1 dissecting rulers (to frame by laser-technology).
- 3-part working area (1100Wx600Dmm) w. finger-holes and
surrounding perforated extraction channel (80mm). Each part can
be raised up to 70° for optimum exsanguination of animals.
- Super structure with 2-part storage cabinet with lift-doors. For
specimen containers, servers, camera, barcode readers, dictating
systems, PC hardware and documentation.
- Sink 400 x 400 x 250(D)mm with flexible shower and hw/cw
mixing device.
- Sprinkler wash-down system with 10 spray-jets in plenum below
the perforated work area.
- Illumination: 2 adjust. spots and 2 fluorescent lights (12000 lumen)
- 2 sockets (230V) and 1 empty PC-data receptacle
- Dissecting board with 4 feet (30mm). Material: CORIAN. With blue
„macro-field“, 100mm dia. for optimum differentiation
- Waste formalin drainage system with micro-strainer and 15
litre waste tank positioned on a mobile stainless steel cart.
- Paper towel holder
- Rinse bar with 8 spray jets (120°) for cleaning the plenum.

All infos for this product can be found at Product-Specification.pdf

MA-2046 Standard Animal Dissecting Table

Description and Features
with 4 feet (fixed or mobile)

MA-2033 Veterinary Anatomy / Pathology Clamping System for Animal Heads

Description and Features
Mobile system for precise and safe clamping of several sizes
animal heads (for BSE operations etc.) Variable clamping area
of 800(D) x 500(W)mms. Clamping stroke: 100mms. Detachable
accessory panel 700 x 500 at lower frame area.
Material: all stainless steel EN/DIN 1.4301 K 240
Dimensions: 800(W) x 600(D) x 900(H)mms